This camera is used in night for video and image.any normal camera quickly convert from normal camera to night vision camera.
you need:
1)Normal digital camera.
2)Few inferred led (locate on remote control) and buy from electronic shop.
3)one power source (battery).
4)a piece of unused film (named: Kodak,FUJI FILM,etc)
5)some instrument like screw driver,knife, glue etc.
1st:you need one digital camera and open the camera by screw driver very care fully.now open the lens with care then you find a red colored thin plastic or glass locate inside the lens or near lens.remove the plastic or glass very carefully.
2nd:now take some inferred led lame and engaged them in a required PCB. now connect the circuit to the battery but you do not see the light by normal eyes.but camera do this.
3rd:now take a piece of unused film camera's film and cut the file.size of cut will be same size of removed red plastic.(will be removed from camera in 1st part)because fill the red plastic's gap by film.the film work as a inferred filter.cut the film as per required size by the knife and place the piece of film by glue.
4th:now assembled the camera by screw driver except red plastic.
in night you connect the led circuit yo the battery also you make inferred flash light as you wish.on the camera and record or take photo.you don't see the inferred light but camera do this but camera gives you black and white image or video.
No comments:
Post a Comment